DIY Envelope Template

Here's an easy way to make an envelope template to fit any card size. You'll need an envelope that's too big for the card, scissors, and tape (removable if you want to be able to resize the template).

Gently unfold the envelope.

Cut it into four pieces. It doesn't have to be exact, but cut so you cross somewhere near the middle.
I like to number the pieces before cutting to help keep things in order, but you don't have to.

Place your card in center of the envelope pieces, and fold the envelope around it so it fits properly.
Tape the pieces in place. You should only need one piece of tape on the side without the flap.

Now you have a template. Trace on your paper, cut it out, and glue it together as the original envelope was.

DIY Stamps in a Tin

What you'll need:

craft foam

glue (unless you use self-adhesive foam)

tape

punch in desired shape

cardstock

empty Altoids tin

Cut a piece of cardstock to fit inside the tin. 

Punch shapes out of the foam. I used some self-adhesive foam shapes from the dollar store, and punched stars.

Glue the shapes to the cardstock. 

Add tape to the backside of the cardstock, to create a slick surface. This is so you can remove the tape from the next step easily.

Roll a piece of tape inside out (try not to make it too bulky) and use it to stick the slick part of the cardstock to the smooth underside of the Altoids box.

Now you're ready to stamp!

If you used pre-cut shapes, and you actually like them, you can just make them into stamps without any punching.

When you're done stamping, just remove and throw the rolled tape away, or reuse with another stamp. 

You can create several stamps and store them in the tin.

Card with a Pocket

I like Inkadinkado's Sing Like No One's Listening stamp so much, but I used it as a magnet instead of a card, so I thought it would be nice to create a card that would hold it.

First I needed a pocket. I originally used a regular piece of paper to make a template, then recreated it with a piece of cardstock. It's basically just a piece that's folded in half, then both sides are folded back at the right size for the magnet, and taped. Here is the back of the pocket:

For the front of the pocket, I used an Inkadinkado bird (one I previously cut in two, but still works just fine), watercolor pencils, and a couple of jewels.

I watermarked the background of the inside of the card with my xmas carol stamp, to infuse a bit of holiday spirit.

For the front of the card, I used another Inka bird stamp, and did emboss resist with watercolors. The sentiment, by Momenta, was stamped with Versamark + pink pigment ink on one half + lavender dye ink on the other, since I don't have pigment of that. It's a bit messy, but I'm okay with it.

Owl Window Gift Tag

Here's a gift tag I made for my nephew.

I embossed an owl from Inkadinkado on the inside of a small card.

Then I punched a piece of scrap with a 1inch circle punch. Using the punched piece, I decided where I wanted the window, and measured the distance from the top and side. Then I made marks on the front of the card to guide my punch.

I stamped "Who?" on the outside, and on the inside, wrote my nephew's name.

Happy Birthday Nana

It was my mother-in-law's birthday recently, so what better way to try out my new embossing stuff?

yeah, the picture's terrible

I originally wanted just purple on lavender, but I cut the purple wrong, so I layered it with black to make up for the mistake. The sentiment it stamped with lavender and then an offset black. I don't have a corner rounder, so I just used a pair of scissors. It wasn't easy.

The embossing was a bit tricky too. I wanted to use two different colors with one stamp, and I tried a few different ways I'd seen online, but none worked well for me, so I had to resort to surgery.

this bird is from Inkadinkado

I stamped and embossed the bird first, then lined up the leaves on the acrylic block, so when I removed the bird part the leaves would fit around the embossed bird. Surprisingly, it worked very well.

The inside required some cutting too. I don't have any flower stamps, so I cut some off another Inka bird.

 

I also added a couple of punched butterflies to the front, but I forgot to take a picture before I gave it to her. She did love it though!

And in case you ever wondered, this is what happens when you emboss black powder on white ink:

Recollections Embossing Kit

I've been wanting to try heat embossing, but with all the equipment needed for it, I didn't think I ever would. Then I saw an embossing kit at Michaels by Recollections. I looked it up online to see reviews, but couldn't find anything. So I used a coupon, and bought it (original price was $40). It comes with a heat tool, six powders, six inks, and a funnel tray.

Colors: black, pink, silver, green, turquoise, and clear. The clear is the ink that looks yellow, and the powder that looks white.

So far, the inks and powders are nice, and the heating tool works well. Unfortunately, there is no anti-static bag / embossing buddy. But I just made one using this tutorial. I also didn't find the tray to be very useful, as the powder sticks all over it. Using coffee filters or a folded paper is much better. I will keep the tray and try it with glitter.

The bottom line is that it's a really good starter kit, especially if you get it cheap.
Also, here's my very first heat embossed image:

Magnets

Since I've really gotten into all this papercraft crap, I've wanted to find other uses for the stamps. One thing I've come up with is magnets. Using flat magnets, like those you sometimes find with business cards, you can make very pretty images.

I got these large flat magnets in some craft kit ages ago, and had yet to find a use for them. So I took some cardstock that I liked, and Mod Podged it on. It's very pretty, despite my poor cutting job, but kind of impersonal.

So I pulled out this Winnie the Pooh stamp I had, and thought it would be great to make into a magnet for my niece to hang her artwork on the fridge. I used StazOn so the Mod Podge wouldn't make it run, and colored it with colored pencils.

Here's the finished magnet, plus two more that I made for others.